Billing Hours to Clients: From Timesheet to Invoice Without Leaks
Billing hours means charging the client for time worked: you take the approved, billable hours for a closed period, price them at the agreed rate and send them with a timesheet specification attached to the invoice. It sounds like admin, but this is where an agency's revenue actually gets made. An hour that was worked and never billed is an hour you gave away. This article is about that last stretch: how to bill under each pricing model, what a fixed monthly billing run looks like, what the client wants to see on a timesheet specification, and how to measure how many hours disappear along the way.
Which hours count as billable, and how to calculate your utilization percentage, is covered in increasing billable utilization. Here we assume the hours have already been logged as billable, and the question is how they end up on the invoice.
Three ways to bill hours
How you bill hours depends on what you agreed with the client. In practice there are three models, often side by side for a single client.
| Billing model | What you invoice | Role of the logged hours |
|---|---|---|
| Time and materials | All approved hours × rate | The hours are the invoice |
| Fixed price | The agreed amount, often in instalments | Internal only: watching the budget |
| Prepaid block or retainer | A fixed monthly fee or a prepaid block of hours | Drawing down the balance, and billing what goes over |
Time and materials is the simplest model to bill and the hardest to sell well: the client sees every hour, so every line has to be right and explainable. Fixed price seems to make billing hours unnecessary, but the hours remain the only early signal that a project is running over budget; see preventing project budget overruns and, for the invoicing itself, milestone invoicing. With a retainer you bill the fixed fee and use the hours to track how much of it has been used. Anything outside the agreement becomes out-of-scope work and goes on the invoice as a separate line. How to track usage against the monthly budget is covered in managing retainers.
The key point: log the hours the same way in all three cases. Whether an hour is time and materials, fixed price or retainer belongs to the project or the service, not to the person logging it.
The billing run in five steps
Agencies that lose hours rarely lose them while logging. They lose them in the weeks between logging and invoicing. A fixed monthly run in a fixed order closes that gap.
1. A hard cut-off date. Agree that last month's hours are complete by the second working day at the latest. Anyone adding hours after that date logs them in the current month. Without a cut-off, every period stays open and nobody knows when they can invoice.
2. Check completeness. Look at which working days are missing per person before you review a single line. A week without hours is almost never a week without work; it is a week that gets filled in from memory later, with fewer hours and vaguer descriptions.
3. Approval by whoever knows the project. The project lead sees at a glance that three hours of "meeting" are on the wrong project; the finance team does not. Put approval with the content, and reject with a reason so the person can fix it.
4. Check against the agreement. Put the approved hours next to the budget or the proposal. This is where you decide on each overrun: is it out-of-scope work you pass on, or do you deliberately write it off? Either is fine, as long as it is a decision and not an oversight.
5. Specify and invoice. Only now do you create the invoice, with the timesheet specification attached. If you do this within the first week of the month, you also get paid sooner: the client still remembers the work, and a question about a line is quickly answered.
In a well-run agency, step 1 to step 5 takes one to three working days. If it stretches to two or three weeks, work in progress grows and so does the money you are pre-financing; see calculating work in progress.
The timesheet specification: what the client wants to see
A timesheet specification is the attachment to the invoice that shows, line by line, what work was done, by whom and how long it took. Under EU VAT rules an invoice must describe the nature and quantity of the services supplied; a separate specification is not required, but for time-and-materials work almost every client expects one. A specification the client can sign off without questions has these columns:
| Column | Why |
|---|---|
| Date | The client checks it against their own calendar |
| Person or role | Explains rate differences between lines |
| Description | The only field that convinces the client |
| Hours | In decimals, not hours and minutes |
| Rate and amount | Only if rates differ by role or type |
The description is where specifications most often fall apart. A description should tell the client what they got, not what the person did.
| Weak | Strong |
|---|---|
| Meeting | Meeting with procurement on supplier choice, proposal revised |
| Changes | Feedback round 2 applied to home and contact pages |
| Research | Comparison of three hosting options, recommendation written |
| Miscellaneous | (do not use) |
How granular to go is an agreement, not a law. Accountants, lawyers and tax advisers often log in six-minute units (0.1 hour) and specify per task, because their clients expect it. Creative and digital agencies usually specify per day or per task, and a monthly retainer often only needs an overview per activity. Pick one level per client and stick to it; a specification that looks different every month raises questions that were not there before.
Write-offs and the realization rate
Not every hour logged as billable actually gets billed. Sometimes you write hours off on purpose: onboarding a new team member, fixing your own mistake, a budget you would rather not exceed with an important client. That is a legitimate choice. The problem only starts when nobody knows how much it adds up to.
That is what the realization rate is for: the share of hours logged as billable that were actually invoiced.
realization rate = billed hours ÷ hours logged as billable × 100%
Where utilization measures how much working time goes to client work, the realization rate measures how much of that client work actually gets paid. They are two different leaks. A worked example for one month:
| Hours | |
|---|---|
| Logged as billable | 620 |
| Rejected at approval (wrong project, duplicate) | 15 |
| Deliberately written off (fixed-price overrun) | 48 |
| Billed | 557 |
| Realization rate | 90% |
At an average rate of €95, that 63-hour gap is almost €6,000 in a single month. A realization rate above 90% is healthy for most agencies; if it consistently drops below 85%, look per project at whether it is always the same client, the same service or the same way of quoting. The cause often turns out to be in the proposal: work that is systematically underestimated gets systematically written off.
So do not delete written-off hours from your records. Leave them in and mark them as written off, so they count in the project's post-calculation. An hour you delete to keep the specification tidy also disappears from the numbers you use for your next proposal.
Why hours go unbilled
When the billing run does not work, it is almost always one of these five causes:
- Hours are logged too late. Filling in Friday afternoon from memory demonstrably loses hours. Logging daily, or a weekly reminder to whoever is behind, is the cheapest improvement there is.
- Hours are on the wrong project or the wrong type. A billable hour on an internal type never reaches an invoice. Keep the pick list short and only let people choose projects they work on.
- Nobody owns approval. If finance has to wait for a project lead who never gets round to it, the invoice slips a month. Set a deadline for approval too.
- Billing waits until the project ends. A four-month project invoiced in one go is four months of pre-financing. Bill time and materials monthly, even while the project is still running.
- The descriptions do not hold up. An invoice that comes back with questions gets paid later. A short agreement on what a good description looks like saves more than a payment reminder.
Billing hours in Horixa
In Horixa the hour type determines whether an hour is billable and at what rate, and the service on the project determines whether it is time and materials, fixed price or subscription. People only pick a project and a type. Project leads approve or reject hours on their own projects, and approved time-and-materials hours then sit ready as draft lines on the client's draft invoice, together with instalments and subscriptions. Hour overviews per project can be exported as CSV for a specification in your own layout. See invoicing for the rest of the chain.
Frequently asked questions
How often should you bill hours? For time and materials, monthly, within the first week after closing the month. Longer projects with large amounts sometimes every two weeks. Waiting until the end of a project is the most expensive choice, because you pre-finance the work for months.
What is the difference between billable hours and billed hours? Billable hours are the hours you can charge for: work on a client engagement. Billed hours are the hours that actually appear on an invoice. The difference consists of rejected and written-off hours, and the ratio between them is the realization rate.
Can you bill travel time? Only if your engagement letter says so. Common arrangements are travel at the full rate, at a reduced rate, or not at all and built into the hourly rate. Always log travel on its own type, so you can decide per client whether it goes on the invoice.
Is a timesheet specification required on an invoice? Not as a separate attachment. An invoice must describe the services supplied and their quantity; for time and materials that in practice means the number of hours and a description of the work. Most clients do require a specification for hourly work, and it prevents questions that delay payment.
What do you do when a client disputes billed hours? Go back to the line and the description, not the total. Usually it is a handful of lines where the client cannot see what they delivered. Explain those, and write off whatever you cannot properly explain yourself; that costs less than a client who starts checking every invoice. Take the lesson into your agreement on descriptions.
How do you bill hours on a fixed-price project? You don't: you invoice the agreed amount, usually in instalments. You do log the hours, on the same project, to watch the budget and to see at post-calculation whether the price was right. Anything outside the agreed scope you bill as out-of-scope work.